Coin trays..... 上市 Deposited

Re

文章內容
  • From rogersiboni@aol.com Fri Nov 29 20:26:20 2002
    Return-Path: <rogersiboni@aol.com>
    X-Sender: rogersiboni@aol.com
    X-Apparently-To: colonial-coins@yahoogroups.com
    Received: (EGP: mail-8_2_3_0); 30 Nov 2002 04:26:20 -0000
    Received: (qmail 33680 invoked from network); 30 Nov 2002 04:26:20 -0000
    Received: from unknown (66.218.66.218)
    by m11.grp.scd.yahoo.com with QMQP; 30 Nov 2002 04:26:20 -0000
    Received: from unknown (HELO n7.grp.scd.yahoo.com) (66.218.66.91)
    by mta3.grp.scd.yahoo.com with SMTP; 30 Nov 2002 04:26:19 -0000
    Received: from [66.218.67.133] by n7.grp.scd.yahoo.com with NNFMP; 30 Nov 2002 04:26:19 -0000
    Date: Sat, 30 Nov 2002 04:26:17 -0000
    To: colonial-coins@yahoogroups.com
    Subject: Re: Coin trays.....
    Message-ID: <as9el9+n1d9@eGroups.com>
    In-Reply-To: <BA0D3A65.39203%auctoricon@attbi.com>
    User-Agent: eGroups-EW/0.82
    MIME-Version: 1.0
    Content-Type: text/plain; charset=ISO-8859-1
    Content-Length: 909
    X-Mailer: Yahoo Groups Message Poster
    From: "mantoloking2002" <rogersiboni@aol.com>
    X-Originating-IP: 205.188.209.77
    X-Yahoo-Group-Post: member; u=119287572
    X-Yahoo-Profile: mantoloking2002

    All,

    I am using Sycamore and velevt inserts. I understand Sycamore being a
    hard blond wood has minimal corrosive affects to the coins. I think
    velevt will probably have a slightly less abbrasive affect on the
    coins. Finally, I am going to try small rubber feet on the bottom of
    the trays just so they hold a bit better.

    Will send photos as they evolve.

    Roger

    --- In colonial-coins@y..., rob retz <auctoricon@a...> wrote:
    > The talk about custom built wood coin trays got me out to the
    woodshop. I'm
    > in the process of building a prototype out of bloodwood. I
    probably won't
    > have it done for several weeks as I have go back for my 4th round
    of chemo
    > next week as well as to acquire a couple of new router bits to box
    joint the
    > corners of the frames. When I recover from the next round I should
    be able
    > to get the prototype finished and I'll try to post a photo at that
    time.
    >
    > Rob

來源網址 發布日期
  • 2002-11-29
體積
  • 1

人际关系

NNP作者