Definición

• Coin Relief.  Very low relief which can be rendered into a die that can strike a piece with a single blow in a coining press. A form of bas-relief (French for low-relief), this would best be described as low, low-relief (Italian stiacciato). In addition to no tall projects of relief, coin relief has a narrow band of modulated relief. It is modeled close to the background with absolutely no undercuts, or bevel of less than 15°, on all lettering and design – the die must be able to strike and withdraw quickly with this relief. Thus the model must have these same restrictions as the coin die.
  Coin relief models are prepared on a basin that is slightly dished. This aids in preparing a die with a modeled die camber where all the relief is below the rim. The theory is that this reduces wear on coins struck from such a die – the rim bears the brunt of the constant wear (at least such wear against flat surfaces). In modeling a coin model artists  can check that the relief remains below the height of the rim by placing a straight edge, as a ruler placed across the diameter of the model.  Coin relief is measured with a depth gauge.  See relief.  
  The following entry is a stub. You may wish to submit further content which describes the subject in greater detail. It also needs photo(s) or drawing(s) to exemplify the subject or content. Contact editor: dick.johnson@snet.net

  excerpted with permission from

  An Encyclopedia of Coin and Medal Technology

  For Artists, Makers, Collectors and Curators

  COMPILED AND WRITTEN BY D. WAYNE JOHNSON

  Roger W. Burdette, Editor

Relaciones